RomanaEnglish

Choose language:

TrendVario 6300

trendvario6300

The premium semi-automatic parking system with 3 parking levels

The TrendVario 6300 creates more parking spaces in a small area.

The entrance to the TrendVario 6300 is at ground level. Unlike the other models, the system accommodates three vehicles one above the other, and the parking spaces are moved vertically and horizontally: down into the pit or up to the third parking level. This means that they accommodate more cars within the same floor area. The requested parking space is automatically moved into position. For maximum operating safety, the access level is secured from the entire system by gates. This also protects the vehicles from theft and vandalism. The semi-automatic parking system offers up to 29 parking spaces in total.

You can also enhance your TrendVario 6300 with our premium accessorires.

SPECIFICATION*

  • For independent parking
  • 15 grids behind each other – up to 29 parking spaces are possible
  • Building height: 325 cm to 460 cm in 5 cm increments
  • Pit depth: 175 cm to 240 cm in 5 cm increments
  • Vehicle dimensions: height 150 cm to 215 cm, length 500 cm  to 520 cm
  • Usable platform width: 230 cm to 270 cm
  • Platform load: 2,000 kg per parking space, optionally 2,600 kg or max. 3,000 kg
  • Horizontal access to all parking levels
  • Platform coating: StandardGrip, optional AluLongLife or EasyWalk
  • Operation via SmartChip, SmartPortable or SmartApp

HMI-TrendVario6200-300x225.jpg (9 KB)

* Assignment according to product data sheet

FIELD OF APPLICATION

  • In residential and commercial buildings in large cities
  • For additional parking spaces in office buildings or residential and commercial buildings
  • To increase capacity in underground car parks or parking garages, e.g. of hotels
  • More parking spaces for car dealerships, car rental companies or vintage car collections
  • Ideal in the case of constructions abutting property lines

SPECIFICATION GATES

  • Standard gates: vertical gates, electrically
  • Electrically sliding gates as an option
  • Remote control as an option
  • Gate frame made from extruded aluminium profiles with two vertical centre stay bars for the vertical gate and one vertical centre stay bar for the sliding gate
  • Standard gating material: perforated aluminium plate
  • Optional for sliding gates:
    • Around 50 individual variations are possible in different materials and colours
    • Glass (laminated safety glass), wood (Nordic spruce), aluminium, steel and many other options available.
    • Interchangable panels and segments

 

Vertical gates

Perforated aluminium plate

Vertikaltor-TrendVario.jpg (80 KB)

Type:

  • Thickness 1,5 mm, RV 5/8 E6/EV1, anodized, layer thickness approx. 20 μm
  • Ventilation cross-section of the panelling approx. 30%

Sliding gate – overview of variants

Perforated aluminium plate

Tore-Stahllochblech-300x200.png (98 KB)

Type:

  • Thickness 2 mm, RV 5/8 E6/EV1, anodized, layer thickness approx. 20 μm
  • Ventilation cross-section of the panelling approx. 40%
 Beaded steel plate
Tore-Stahlsickenblech-300x200.png (91 KB)

Type:

  • Thickness 1 mm, hot-dip, layer thickness approx. 20 μm
  • Additional powder coating
  • Layer thickness approx. 25 μm on the outside and approx. 12 μm on the inside
  • Many RAL colours available

Steel wire grating

Tore-Alulochblech-300x200.png (95 KB)

Type:

  • Mesh size 12×12 mm
  • Thickness 2 mm, galvanized, layer thickness approx. 20 μm
  • Ventilation cross-section of the panelling approx. 70%

Wooden panelling, Nordic spruce

Tore-Holzfüllung-300x200.png (95 KB)

Type

  • Nordic spruce, grade A
  • Vertical tongue and groove boards
    Preimpregnated (colourless)

Plain aluminium sheet

Tore-Aluglattblech-300x200.png (97 KB)

Type:

  • Thickness 2 mm, E6/EV1, anodized, layer thickness approx. 20 μm
 

Laminated safety glass

Tore-Glas-300x200.png (94 KB)

Type:

  • LSG consisting of ESG 8/4 mm

VIDEO PRESENTATION

 

 

© 2024 KLAUS Multiparking Systems Romania

PARK AND SMILE